1
351517
Fluidzon / Spare parts
Schwab UP 185
Original replacement articles, manufacturer drawing and matching technical documents. Confirm your model and installation generation before selecting a replacement.
Explore the assembly.
Select a position on the drawing, or find your article below.
Pinch or scroll to zoom · Drag to pan
Drawing positions
Schwab UP 185 / flush plates
Choose the design. Then the finish.
Match the plate mechanism and installation generation before ordering. Historical references do not establish current availability.
2. Finish
241331Enquire about this plate ↗
- white
- Plastic
- start-stop
- mechanical
TECTA · white
- Material
- Plastic
- Operation
- start-stop
- Mechanism
- mechanical
- Actuation
- top on UP185; product property table also says front, but model-specific catalogue and TECTA instruction specify top
- EAN
- 3838912036209
Generation & required hardware
185.000: 1993-1997 (P-IX3671/I), 1997-1998 (P-IX8155/I); 185.1600 since 1999. Top; start-stop.
Existing I2 bridge/retaining clip 363793 and I6 outlet-valve bridge 363818. Instructions 230467 specifically depict 185.1600; older installation procedure not separately verified.
Exact plate mechanism must match; no manufacturer plate revision/cutover date found.
Schwab UP 185 / replacement articles
Every part, in view.
8 of 8 components
2
352277
3
352281
4
360711
5
363793
6
363802
7
363818
9
675105
Schwab UP 185
Technical Documentation & Drawings
TECTA — Installation instructions
Installation manual · PDF · 366 KB
Model support
Check the cause. Match the article.
These are inspection references from this model’s parts list, not a diagnosis or a guarantee that replacement is needed. Confirm the generation and drawing position.
Water continues into the bowl
Check the outlet seal and valve seating, fill shut-off and plate adjustment before selecting a replacement.
- 351517 — Flange gasket for flush valve
Drawing position 1 · Listed by Schwab for Schwab UP 185. Confirm the installation generation and connection before ordering.
- 360711 — Flush valve with gasket (withour lifter), cistern 185
Drawing position 4 · Listed by Schwab for Schwab UP 185. Confirm the installation generation and connection before ordering.
- 675105 — Fill valve 185
Drawing position 9 · Listed by Schwab for Schwab UP 185. Confirm the installation generation and connection before ordering.
Slow refill or valve noise
Check supply isolation, filter and fill valve condition. Match the connection thread and installation generation.
- 675105 — Fill valve 185
Drawing position 9 · Listed by Schwab for Schwab UP 185. Confirm the installation generation and connection before ordering.
Button loose or not operating
Check the plate mechanism, rods and holders against the model drawing; plate design alone does not establish compatibility.
- 363793 — Bridge with clip, cistern 185
Drawing position 5 · Listed by Schwab for Schwab UP 185. Confirm the installation generation and connection before ordering.
- 363818 — Bridge, cistern 185
Drawing position 7 · Listed by Schwab for Schwab UP 185. Confirm the installation generation and connection before ordering.
Technical support · UAE
The right part starts with the right model.
Have a label, an article code or an old part? Share the details with our technical team.